 Irwin Record |
|
These vices are fitted with quick release mechanisms. The adjustable front stop or dog gives an additional cramping facility when used in conjunction with a bench stop. A useful addition which provides a normal vice and tail vice in one tool.Jaw Width. 10.1/2in.Jaw opening: 15in... More Info
|
|
|
Woodwroking vice for the professional user who requires a plain screw action.The plain screw works through a separate unbreakable nut securely housed beneath the body seating to ensure constant alignment of screw mechanism.Fitted with front dog.Jaw Width. 10.1/2in.Jaw opening: 15in... More Info
|
|
|
Specially designed double ended wrenches to fit 1/2in (13mm) and 3/4 (19mm) lavatory basin and bath nuts.Designed for use in situations where access is restricted.Size 1/2in, 3/4in - 13 -19mm... More Info
|
|
|
360 degree swivel bases are used to rotate and lock the vice at the most convenient working angle.To fit No.6, 8, 25 & 36 Vices.... More Info
|
|
|
The Record 778 rebate plane has two cutter positions, one for normal rebating work and a forward position for planing into corners and difficult positions.The adjustable fence supplied can be used on either side of the plane to accurately control the size of the rebate.Cast iron body with accurately ground base.Five thread depth adjusting screw for... More Info
|
|
|
Replacement Single Iron for the Record 778 Rebate Plane.Size 1. 1/2in.... More Info
|
|
|
Compact quick release engineers vices have special jaws and slide design to provide extra space for holding irregularly shaped work. Ideal for fitting and filing.An integral anvil permits hammering.The reinforced body and slide, large diameter main screw and through bolted jaws invest these vices with the working strength and resilience to withstan... More Info
|
|
|
Clipper cut is essential where bolts have to be close cut.Suitable for trimming protruding bolts or removal of rusted nuts in demolition work.Will handle mild steel bolts, rods, non-ferrous metals and synthetic materials.Overall Length 14in.Max Cutting Capacity 5/16in/7.9mm.... More Info
|
|
|
High tensile jaws are specially heat treated for cutting very hard materials up to Brinell 500, (Rockwell C52, 110 tons/in2).Centre cut jaws have short nose for trouble free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.Overal... More Info
|
|
|
|
Clipper cut is essential where bolts have to be close cut.Suitable for trimming protruding bolts or removal of rusted nuts in demolition work.Will handle mild steel bolts, rods, non-ferrous metals and synthetic materials.Overall Length 18in.Max Cutting Capacity 3/8in/9.5mm.... More Info
|
|
|
|
High tensile jaws are specially heat treated for cutting very hard materials up to Brinell 500, (Rockwell C52, 110 tons/in2).Centre cut jaws have short nose for trouble free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.Overal... More Info
|
|
|
Guaranteed against breakage with exceptional strength in load bearing areas.Single V-jaw in frame moves between two V-jaws in base to hold even the smallest pipe sizes securely.Self locking frame is reversible for right or left-hand operation.Replaceable Steel JawsCan be fitted to Bench or StandPipe Capacity 1/8in to 2.1/2in O.D.... More Info
|
|
|
|
Clipper cut is essential where bolts have to be close cut.Suitable for trimming protruding bolts or removal of rusted nuts in demolition work.Will handle mild steel bolts, rods, non-ferrous metals and synthetic materials.Overall Length 24in.Max Cutting Capacity 7/16in/11.1mm.... More Info
|
|
|
|
High tensile jaws are specially heat treated for cutting very hard materials up to Brinell 500, (Rockwell C52, 110 tons/in2).Centre cut jaws have short nose for trouble free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.Overal... More Info
|
|
|
|
Guaranteed against breakage with exceptional strength in load bearing areas.Single V-jaw in frame moves between two V-jaws in base to hold even the smallest pipe sizes securely.Self locking frame is reversible for right or left-hand operation.Replaceable Steel JawsCan be fitted to Bench or StandPipe Capacity 1/8in to 2in O.D.... More Info
|
|
|
|
Guaranteed against breakage with exceptional strength in load bearing areas.Single V-jaw in frame moves between two V-jaws in base to hold even the smallest pipe sizes securely.Self locking frame is reversible for right or left-hand operation.Replaceable Steel JawsCan be fitted to Bench or StandPipe Capacity. 1/8in to 3.1/2in O.D.... More Info
|
|
|
|
Clipper cut is essential where bolts have to be close cut.Suitable for trimming protruding bolts or removal of rusted nuts in demolition work.Will handle mild steel bolts, rods, non-ferrous metals and synthetic materials.Overall Length 30in.Max Cutting Capacity 9/16in/14.3mm.... More Info
|
|
|
|
High tensile jaws are specially heat treated for cutting very hard materials up to Brinell 500, (Rockwell C52, 110 tons/in2).Centre cut jaws have short nose for trouble free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.Overal... More Info
|
|
|
|
High tensile jaws are specially heat treated for cutting very hard materials up to Brinell 500, (Rockwell C52, 110 tons/in2).Centre cut jaws have short nose for trouble free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.Overal... More Info
|
|
|
|
High tensile jaws are specially heat treated for cutting very hard materials up to Brinell 500, (Rockwell C52, 110 tons/in2).Centre cut jaws have short nose for trouble free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.Overal... More Info
|
|
|
|
Guaranteed against breakage with exceptional strength in load bearing areas.Single V-jaw in frame moves between two V-jaws in base to hold even the smallest pipe sizes securely.Self locking frame is reversible for right or left-hand operation.Replaceable Steel JawsCan be fitted to Bench, NOT recommended for use on StandPipe Capacity. 1/8in to 6in O... More Info
|
|
|
Useful shaping tool for curved surfaces.The A151 is for convex curves.The malleable iron handles are virtually un-breakable and designed for a lifetimes use.Fully adjustable cutter made from top quality tool steel to create and retain a keen cutting edge.Length 10in - 250mm.Cutter width 2. 3/8in - 60mm.... More Info
|
|
|
Replacement Spokeshave Iron for the A151/A151R Spokeshaves. Cutter width. 2. 1/8in - 54mm.... More Info
|
|
|
Useful shaping tool for curved surfaces.The A151R is for concaved surfaces.The malleable iron handles are virtually un-breakable and designed for a lifetimes use.Fully adjustable cutter made from top quality tool steel to create and retain a keen cutting edge.Length. 10in - 250mm.Cutter width. 2. 3/8in - 60mm.... More Info
|
|
|
Cam adjusted - BC Series.Special design for quick simple adjustment, yet still offering heavy-duty cutting performance and hard working reliability.Economically priced.The lighter handle construction is ideal for difficult or uncomfortable situations.Overall Length 14in.Max Cutting Capacity 3/16in/5.0mm.Centre Cut... More Info
|
|
|
|
Cam adjusted - BC Series.Special design for quick simple adjustment, yet still offering heavy-duty cutting performance and hard working reliability.Economically priced.The lighter handle construction is ideal for difficult or uncomfortable situations.Overall Length 18in.Max Cutting Capacity 1/4in/6.4mm.Centre Cut.... More Info
|
|
|
