 Nicholson |
|
This Millsaw File is of rectangular section and used primarily for sharpening mill or circular saws.Single cut teeth on both sides and edges.Has two round edges.Overall Size (excluding tang) is approx 204 x 20 x 4mm.8in.Second Cut.Tanged... More Info
|
|
|
Single Cut Teeth for sharpening round-hooded chain saw teeth.Safe point and efficient tooth design.Length. 6in.Diameter. 1/8in.... More Info
|
|
|
Pro 4-in-1 Series Hacksaw FrameStandard 90 degree for general use 45 degree angle for flush cuts Low profile position for tight spaces Jab saw configuration for a variety of inside cuts High tension for tightening the blade up to 30,000 psi Cushion grip handle for better control and comfort Magnetic blade storage inside frame ... More Info
|
|
|
|
Single Cut Teeth for sharpening round-hooded chain saw teeth.Safe point and efficient tooth design.Length. 8in.Diameter. 1/4in.... More Info
|
|
|
For sharpening saws with 60ΒΊ angle.No tang but tapered at each end and supplied with wooden handle.Single cut teeth.Length 6in.Side 13/64in.... More Info
|
|
|
For sharpening saws with 60ΒΊ angle.No tang but tapered at each end and supplied with wooden handle.Single cut teeth.Length. 7in.Side. 7/32in.... More Info
|
|
|
|
For sharpening saws with 60ΒΊ angle.No tang but tapered at each end and supplied with wooden handle.Single cut teeth.Length 8in.Side 9/32in... More Info
|
|
|
A single ended triangular saw file, single cut. For Dovetail and other fine toothed sawsApproximate Size. (excluding tang) 100 x 4.5mm.Size: 4in x 3.1/6inTanged... More Info
|
|
|
|
A single ended triangular saw file, single cut. For Dovetail and other fine toothed saws.Approximate Size. (excluding tang) 150 x 6.5mm.Size: 6in x 9/32inTanged... More Info
|
|
|
A general purpose file suited to agricultural use.It is self handled, flat with parallel sides.Teeth are single cut and the file has two safe edges.There is a hang up hole in the handle.Length. (excluding handle) 250mm. (10in)... More Info
|
|
|
|
A general purpose file suited to agricultural use.It is self handled, flat with parallel sides.Teeth are single cut and the file has two safe edges.There is a hang up hole in the handle.Length. (excluding handle) 200mm. (8in).... More Info
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.10in.Type. Bastard Cut, FlatTanged... More Info
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.12in.Type. Bastard, Cut, FlatTanged.... More Info
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.6in.Type. Bastard Cut FlatTanged.... More Info
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.8in.Type. Bastard Cut FlatTanged.... More Info
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.10in.Type. Second Cut FlatTanged.... More Info
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.12in.Type. Second Cut FlatTanged.... More Info
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.14in.Type. Second Cut FlatTanged.... More Info
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.6in.Type. Second Cut FlatTanged... More Info
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.8in.Type. Second Cut FlatTanged... More Info
|
|
|
For general work on iron and steel.Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.10in.Type. Smooth Cut FlatTanged.... More Info
|
|
|
|
For general work on iron and steel slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.12in.Type. Smooth Cut FlatTanged.... More Info
|
|
|
|
For general work on iron and steel.Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size. 6in.Type. Smooth Cut FlatTanged.... More Info
|
|
|
|
For general work on iron and steel.Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.Size.8in.Type. Smooth Cut FlatTanged.... More Info
|
|
|
Used by cabinet makers and woodworkers.Single cut on edges.Half round with curved side having a larger radius than wood rasp.Length. 10in. Half Round Regular Cut Tanged... More Info
|
|
|
Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.Size.10in.Cut. Bastard Half RoundDouble Cut Both SidesTanged.... More Info
|
|
|
