 Proxxon Buck & Ryan stock a large range of this German high quality model making and model engineering manufacturers products. Proxxon products are renowned for their quality and precision, an excellent choice for anyone beginning in model making or for the experienced model engineer. |
|
Compact but fully equipped miniature plunge router for small work and modelling projects. The 130 watt single speed motor runs at 27,500 rpm for a smooth finished cut on a variety of materials. Small but sturdily built with a base plate measuring 70 x 100mm, equipped with an adjustable side fence and dust extraction hose. Supplied complete with a c... More Info
|
|
|
A truly flexible shaft some 1 metre long with delicate hand piece complete with six steel collets (ranging from 1mm to 3.2mm) for accurate holding of rotary tools and collet nut. Suitable for use with any of the Proxxon range of tools or indeed any type of power source that can grip the 3mm male shaft of the unit.... More Info
|
|
|
Standard carborundum sanding belts for BBS/S block belt sander. Mounted on a high-performance support. Various grits of high density, on a powerful backing, cover a wide range of applications. Used to sand metals, non-ferrous metals, wood and plastic. Size 40 x 265mm.... More Info
|
|
|
300151: Super-Cut, for use on hard wood, soft wood and plastics.702068: Tungsten Carbide tipped, for use on hard wood, soft wood, plastics and aluminium.28734: Tungsten Carbide tipped, for use to cut balsa, plywood, hard and soft woods, polycarbonate, plastic, aluminium and PCBs.28735: Diamond Coated, use on glass, stone and tiles.... More Info
|
|
|
As above, but coarse-toothed (14 TPI) 28176For wood and plastics.... More Info
|
|
|
|
For aluminium and plastic. 28180As above, but special tempered steel, with induction hardened teeth. Extra narrow for tight curves (1,065 x 3.5 x 0.4mm).Coarse-toothed (14 TPI).... More Info
|
|
|
|
Swedish steel (1,065 x 5.0 x 0.6mm) 28174Fine-toothed (24 TPI). For steel and brass.... More Info
|
|
|
Wire brushes 8 and 13mm in a choice of steel or brass; 2 per pack. 2.35mm (3/32") shaft diameter.... More Info
|
|
|
22mm diameter wire brushes mounted on an arbor with 2.35mm shaft diameter. Arbor plus 5 brushes, choice of steel or brass.... More Info
|
|
|
50mm. 1mm thick, 10 teeth, for cutting hard & soft woods. PC Cards & aluminium.... More Info
|
|
|
For sharpening, deburring and general purpose grinding and working of most metals. There are four shapes each supplied in packs of 5. The cylinder is 2.5mm diameter, the ball 5mm, asprin 6mm and taper 7mm. All have 2.35mm(3/32") shanks.... More Info
|
|
|
For sharpening, deburring and general purpose grinding and working of most metals. There are ten 22mm x 3mm wheels and an arbor included in each pack.... More Info
|
|
|
Key Features
For drill shank sizes 0.5 - 6.0mm for TBM Drill Machine
Genuine Rohm high quality product... More Info
|
|
|
Cutting discs made of special compound available in 22mm or 38mm diameter both 0.7mm thick. Use for cutting alloy metals, stainless steel and non-ferrous metals. The 22mm are available as a pack of 10 discs including an arbor with a 2.35mm diameter shank, of as a bulk pack fo 50 discs. The 38mm diameter discs are supplied as a pack of 5, including ... More Info
|
|
|
Cotton, leather and felt polishers; all 22mm diameter. Used to create a high gloss on metal, gold, silver, non-ferrous metals, brass, aluminium, ceramics and porcelain when using polishing paste. They can also be used on lacquered wood and plastics. Shafts of are 2.35mm. High-gloss French polish needs several operating cycles at medium rotational... More Info
|
|
|
A small but precise mains driven modelling saw with an 8mm depth of cut using the standard 58mm diameter blade. It has a fully machined aluminium table top some 160 x 160mm mounted on a sturdy ABS base, and comes with a mitre fence and rip fence. There are 2 blades available for different materials, the 300108 alternating set for wood and plastics ... More Info
|
|
|
Accurately cuts small items of metal, wood and plastic. Table moveable through 45°, allowing mitre cuts. Workpieceis fastened tightly and accurately by means of the integrated clamping device. Clamp jaws 27mm wide and maximum workpiece diameter 20mm. Depth of cut to 13mm. A special slot is provided to clamp H0 model tracks. The fence accepts length... More Info
|
|
|
The lower part of the motor unit and the base plate is made of sturdy diecast aluminium with CNC milled guides. The base plate is surface milled and fitted with an integral vice to ensure work pieces are held firmly and securely for maximum cutting accuracy. The vice cheeks are provided with V-groove (for round parts) and with groove for clamping t... More Info
|
|
|
A 50mm diameter blade with 0.5mm layer "D107" diamond for cutting ceramics, as well as fibreglass sheets.... More Info
|
|
|
These bits have a consistent coating of diamond particles. The 2.35mm(3/32") diameter shafts are made from stainless steel. Sold as a pack of two bits, one 0.8mm diameter the other 1.2mm both with an effective length of 5.0mm. Used for drilling holes in semi-precious stones, jewellery making etc.... More Info
|
|
|
A fine 240V 100W drill grinder with keyless chuck (0.5-3.2mm), well balanced and with variable speed for maximum control. The tool is well designed and the two inset rubber grips on the body ensure a good purchase, important for fine detail work. The permanent magnet motor is powerful and well balanced and the variable speed control gives a range o... More Info
|
|
|
Felt polishing tips and felt discs. Various forms and profiles for multifunctional use. For pre- or high-polishing metal, gold, silver, brass and aluminium when using the polishing paste. Also suitable for mould construction and tool manufacture. Shafts are 2.35mm diameter. When polishing always work at a low rotational speed to prevent the burni... More Info
|
|
|
A fine modelling saw with a maximum depth of cut of 22mm and the facility to tilt the arbor up to 45° for mitred and compound cuts. The table top is very solidly made from die-cast aluminium and measures 295 x 240mm with an extendable work support which pulls out from the left hand side, increasing the width to 500mm. The blade speed can be varied ... More Info
|
|
|
For polishing and smoothing of surfaces. Use on precious metals, non-ferrous metals, stainless steel, glass, porcelain, wood, rubber and plastic. This pack comperises ten 22mm diameter wheels each 3mm thick. An arbor is included with a 2.35mm shank... More Info
|
|
|
Silicon carbide in a resilient flexible compound. Suitable for working precious metals as well as for tool making and precision engineering. Choice of pack of 2 at 14mm diameter, 2 different grades, or mixed pack. Shaft diameter 2.35mm(3/32").... More Info
|
|
|
Especially suitable for polishing precious metals as well as for tool making and precision engineering. Supplied as a pack with four discs, 22mm diameter by 6mm thick and including an arbor. Shank diameter 2.35mm(3/32").... More Info
|
|
|
